Sysmex CA-600 / CS-2500 / CN-3000 Bi-Directional LIS Interfacing Guide
Complete engineering specification, HL7/ASTM protocols, pinouts, and parameter mapping for Sysmex CA-600 / CS-2500 / CN-3000 on AILS Cloud LIMS.
1. Sysmex CA-600 / CS-2500 / CN-3000 Interfacing Overview & Diagnostic Workflow
The Sysmex CA-600 / CS-2500 / CN-3000 is a precision diagnostic analyzer designed for clinical laboratory testing. Connecting the Sysmex CA-600 / CS-2500 / CN-3000 directly to AILS Cloud LIMS eliminates manual data entry, prevents typographical identification errors, and delivers verified results directly to ordering physicians and hospital EMRs.
AILS Gateway manages bi-directional ASTM E1394 / HL7 worklist handshakes with the Sysmex CA-600 / CS-2500 / CN-3000, streaming patient test requests as samples are loaded.
Results are checked against age- and gender-adjusted reference ranges, delta check baselines, and quality control (QC) Levey-Jennings rules before digital sign-off.
2. Sysmex CA-600 / CS-2500 / CN-3000 RS-232 Serial Port & Pinout Configuration
TCP/IP Ethernet (Port 5001) / RS-232 DB9 Serial Cable (9600 Baud, 8-N-1).
[Instrument DB9] [AILS Gateway PC] Pin 2 (TxD / Data Out) ---------> Pin 2 (RxD / Data In) Pin 3 (RxD / Data In) <--------- Pin 3 (TxD / Data Out) Pin 5 (GND / Signal) <========> Pin 5 (GND / Signal) Pin 7 (RTS) & Pin 8 (CTS) [Loopback or None] Baud: 9600 / TCP 5001 | Data Bits: 8 | Parity: None | Stop: 1
3. Sysmex CA-600 / CS-2500 / CN-3000 HL7 v2.x Message Stream
Below is a validated communication frame transmitted between the Sysmex CA-600 / CS-2500 / CN-3000 and AILS LIS middleware:
<STX>1H|\^&|||Sysmex CA-600|||||||P|1394-97|20260815164000<CR><ETX>4C<CR><LF> <STX>2P|1||||Walker^James|||M<CR><ETX>2A<CR><LF> <STX>3O|1|ACC2026081558||^^^COAG_PANEL|||||||A<CR><ETX>4D<CR><LF> <STX>4R|1|^^^PT|12.4|sec|11.0-13.5|N||F<CR><ETX>1B<CR><LF> <STX>5R|2|^^^INR|1.02|Ratio|0.8-1.2|N||F<CR><ETX>2C<CR><LF> <STX>6R|3|^^^APTT|29.5|sec|25.0-35.0|N||F<CR><ETX>28<CR><LF> <STX>7R|4|^^^FIB|310.0|mg/dL|200.0-400.0|N||F<CR><ETX>3E<CR><LF> <STX>8R|5|^^^D_DIMER|0.32|ug/mL|0.0-0.5|N||F<CR><ETX>25<CR><LF> <STX>9L|1|N<CR><ETX>0A<CR><LF>
4. Sysmex CA-600 / CS-2500 / CN-3000 Clinical Parameter LOINC & Reference Range Dictionary
| Instrument Code | LOINC Code | Clinical Parameter Name | Standard Units | Default Reference Range |
|---|---|---|---|---|
| PT | 5902-2 | Prothrombin Time | sec | 11.0 - 13.5 |
| INR | 6301-6 | International Normalized Ratio (INR) | Ratio | 0.8 - 1.2 |
| APTT | 3173-2 | Activated Partial Thromboplastin Time | sec | 25.0 - 35.0 |
| FIB | 3255-7 | Fibrinogen (Clauss Method) | mg/dL | 200.0 - 400.0 |
| D_DIMER | 48065-7 | D-Dimer Quantitative (FEU) | ug/mL | 0.0 - 0.5 |
5. Sysmex Biomedical Engineering Field Notes & Gotchas
In Sysmex CA/CS setup, configure Host Protocol to ASTM E1394 with Baud Rate 9600 or TCP Port 5001.
Verify that ISI (International Sensitivity Index) calibration value is synchronized for accurate INR calculation.
Optical reaction curve analysis data (scattered light intensity) can be stored for clot reaction verification.
Frequently Asked Questions: Sysmex CA-600 / CS-2500 / CN-3000 LIS Interfacing
Common biomedical engineering questions regarding connection, worklist setup, and data capture with AILS Cloud LIMS.
Q: What interface protocols are supported by Sysmex CA-600 and CS-2500?
Sysmex CA-600 and CS series coagulation analyzers use ASTM E1381/E1394 standard protocol over RS-232 serial or TCP/IP socket.
Q: How does AILS handle INR calculations from Prothrombin Time results?
AILS verifies the measured PT in seconds against the analyzer's mean normal PT and reagent ISI factor, confirming the transmitted INR value.
Q: How are critical panic values (e.g. INR > 4.5 or Fibrinogen < 100 mg/dL) handled?
Critical coagulation values trigger visual panic alerts on laboratory dashboards and send automated emergency SMS alerts to clinicians.
Q: Can CS-2500 multi-wavelength optical pre-analytical checks (HIL) be captured?
Yes. Pre-analytical sample integrity checks for Hemolysis, Icterus, and Lipemia are logged to assess potential coagulation interference.
Q: What serial cable is required for Sysmex CA-600?
A standard DB9 Female Null Modem serial cable running at 9600 baud, 8 data bits, Parity None, 1 stop bit.
Related Coagulation Instrument Guides
Compare protocols, pinouts, and parameter mapping dictionaries for comparable diagnostic equipment.
Diagnostica Stago STA Compact Max
Viscosity-based mechanical clot detection coagulation analyzer unaffected by optical lipemia, icterus, or hemolysis. Complete hemostasis profile sync.
Sysmex XN-1000
High-throughput 5-part differential hematology analyzer. AILS LIMS receives complete CBC + DIFF parameters with automated flag mapping and delta check validation.
Sysmex XN-550 / XN-2000
Compact automated 5-part differential hematology analyzer with integrated auto-sampler. Bi-directional host query pulls test profiles by tube barcode.
Connect Your Sysmex CA-600 / CS-2500 / CN-3000 to AILS in Under 15 Minutes
Our specialized biomedical engineering team provides complete plug-and-play drivers, cable diagrams, and bi-directional test verification for the Sysmex CA-600 / CS-2500 / CN-3000.