Getein 1100 POC Bi-Directional LIS Interfacing Guide
Complete engineering specification, HL7/ASTM protocols, pinouts, and parameter mapping for Getein 1100 POC on AILS Cloud LIMS.
1. Getein 1100 POC Diagnostic Architecture & Clinical Use
The Getein 1100 POC (Getein Biotech) operates as a clinical Point-of-Care (POC) Immunoassay analyzer engineered specifically for Portable quantitative fluorescence immunoassay analyzer for cardiac, inflammation, and fertility markers in clinics.. Connecting the Getein 1100 POC to AILS Cloud LIMS eliminates manual transcription, automatically verifies 10 - 100 µL blood/plasma specimen aspirations, and scales sample processing up to Single test in 3 - 15 minutes. The pre-configured driver interfaces over RS-232C Serial DB9 / USB Port executing Key-Value Serial Text Stream / USB Virtual COM standards documented in Getein 1100 Immunofluorescence Quantitative Analyzer User Manual.
Operating over RS-232C Serial DB9 / USB Port, AILS Gateway continuously monitors data streams from the Getein 1100 POC, converting raw detector outputs into standardized clinical metrics and committing results directly to patient charts.
Patient results from the Getein 1100 POC are cross-referenced against historical patient baselines in real time. Velocity checks and biological within-subject variation (CVi) limits flag implausible clinical shifts for supervisory pathologist review before final sign-off.
2. Getein 1100 POC RS-232 Serial Port & Pinout Configuration
RS-232C Serial DB9 / USB Port | Settings: 9600 bps, 8-N-1. Handshake: Automatic result packet transmission to listening COM port
[Getein 1100 POC RS-232 Port] [AILS Gateway COM Interface] Pin 2 (TxD / Data Out) ---------> Pin 2 (RxD / Data In) Pin 3 (RxD / Data In) <--------- Pin 3 (TxD / Data Out) Pin 5 (GND / Signal) <========> Pin 5 (GND / Signal) Pin 7 (RTS) & Pin 8 (CTS) [Hardware Flow Control / Loopback] Baud Rate: 9600 bps, 8-N-1 | Data: 8-Bit | Parity: None | Stop: 1-Bit Shielding: Braided Foil Screened Twisted Pair (Max 15m)
3. Getein 1100 POC ASTM E1394 Record Frame
Below is a validated communication frame transmitted between the Getein 1100 POC and AILS LIS middleware:
<STX>Getein 1100 POC|ACC20261058|20261030122800|VIT-D:31.8|B12:212.0|CEA:3.2|AFP:7.4|PSA:4.2|BHCG:5.3|CHK:44<ETX>
4. Getein 1100 POC Clinical Parameter LOINC & Reference Range Dictionary
| Instrument Code | LOINC Code | Clinical Parameter Name | Standard Units | Default Reference Range |
|---|---|---|---|---|
| VIT-D | 62292-8 | 25-Hydroxy Vitamin D Total | ng/mL | 30 - 100 |
| B12 | 2132-9 | Vitamin B12 (Cobalamin) | pg/mL | 200 - 900 |
| CEA | 2039-6 | Carcinoembryonic Antigen | ng/mL | < 3.0 |
| AFP | 1834-1 | Alpha-Fetoprotein | ng/mL | < 7.0 |
| PSA | 2857-1 | Total Prostate Specific Antigen | ng/mL | < 4.0 |
| BHCG | 21198-7 | Beta-hCG Quantitative | mIU/mL | < 5.0 |
5. Getein 1100 POC Biomedical Engineering Field Notes & Troubleshooting
Verified against Getein 1100 Immunofluorescence Quantitative Analyzer User Manual & Getein 1100 Serial Data Output Protocol Specification
Microparticle Resuspension: Ensure magnetic microparticle reagent vials on Getein 1100 POC are mixed thoroughly prior to loading. Unmixed reagents lead to low signal counts and falsely depressed analyte values.
Sample Volume & Clot Sensing: The Getein 1100 POC aspirates 10 - 100 µL blood/plasma. The ultrasonic clot detection sensor halts probe aspiration if fibrin webs or micro-clots are encountered, sending a hardware error to AILS LIMS.
HL7 / ASTM Message Mapping: The Getein 1100 POC transmits chemiluminescent Relative Light Units (RLU) and calculated concentrations (Cardiac Troponin I, CK-MB, Myo, D-Dimer, NT-proBNP...). Confirm LOINC code mapping in AILS master catalog.
STAT Tube Priority Lane: When loading emergency samples on Getein 1100 POC, utilize the dedicated STAT rack position to allow AILS Gateway to prioritize accession lookup in sub-200ms.
Reagent Lot Calibration Verification: When loading new reagent lots on Getein 1100 POC, verify that master calibration curve barcodes are scanned and validated against Westgard rules in AILS LIMS.
Frequently Asked Questions: Getein 1100 POC LIS Interfacing
Common biomedical engineering questions regarding connection, worklist setup, and data capture with AILS Cloud LIMS.
Q: What pinouts and network settings are required for the Getein 1100 POC LIS connection?
The Getein 1100 POC interfaces using a serial RS-232C Serial DB9 / USB Port connection with parameters configured to 9600 bps, 8-N-1. A dedicated null-modem DB9/DB25 cable with hardware flow control connects to the AILS Gateway hardware edge device or COM-to-IP terminal server.
Q: What is the workflow when loading barcoded tubes onto the Getein 1100 POC?
The Getein 1100 POC executes automated positive specimen identification. AILS Gateway matches tube accession numbers against laboratory orders, routing priority STAT orders ahead of routine tests.
Q: How are high-concentration samples and hook effects handled on the Getein 1100 POC?
AILS Gateway evaluates immunoassay results against historical patient baselines and clinical ranges. Unexpectedly low values on suspected high-titer specimens trigger automated reflex dilution workorders back to the Getein 1100 POC.
Q: How does AILS manage Westgard multirule QC validation on the Getein 1100 POC?
AILS LIMS verifies daily calibration and control runs for Getein 1100 POC. If QC values drift outside acceptable standard deviation limits, the system interlocks patient reporting until a re-calibration run is approved.
Related Point-of-Care (POC) Immunoassay Instrument Guides
Compare protocols, pinouts, and parameter mapping dictionaries for comparable diagnostic equipment.
Wondfo Finecare POC
Fluorescence immunoassay quantitative analyzer for rapid bedside and clinic determination of infection and cardiac markers.
Sysmex XN-1000
High-throughput automated complete blood count (CBC) with 5-part differential, reticulocytes, nucleated RBC (NRBC), and body fluid analysis.
Sysmex XN-550
Compact 5-part differential hematology analyzer with integrated automated sample tube rack feeder for medium diagnostic labs.
Never Lose a Test Result: Resilient Getein 1100 POC Middleware
AILS Edge Gateway buffers all data frames locally if your laboratory internet connection drops. Once reconnected, all pending records from the Getein 1100 POC synchronize automatically to the cloud without human intervention or data loss.